电动执行器

AME 110 NL/ AME 110 NLX

AME 110 是一款高精度调节控制驱动器，适用于搭配 AB-QM DN 15-32 的压力无关型控制阀使用。
流量通过 AB-QM 压力无关型控制阀进行调节，以避免流量过大，降低锅炉和/或制冷主机效率。
使用 AB-QM 的驱动器用于为风机盘管、冷管、诱导器、小型再热器、再冷却器、AHU 以及以热水/冷水为受控介质的其他区域控制末端设备控制供水量。AME 110 具有高精度并提供 LED 灯指示，有助于加快调试过程，易于维护，提高室内舒适度和节能效果。通过驱动器的电压或电流输入信号实现控制。

AME 113 NL / NLX

AME 113 is a series of gear actuators for opening and closing valves for heating and cooling systems. The predominant application is energy-efficient control of water-bearing valves in building services and automation.

The actuator has a safety function: if the power supply fails, the valve pressure plate moves to a parking position using energy from an internal rechargeable accumulator.

The actuator has an equal percentage characteristic, meaning the flow through the valve is proportional to the control signal. Control is performed by a 0-10 V DC signal sent by a central DDC system or a room thermostat. The current position and control voltage are shown on an LC display.
​​​​​​​
The actuator comes with a pluggable connecting cable and has a manual valve adjustment for maintenance or installation.
​​​​​​​
A version with feedback signal is available, transmitting information about the current valve position and any occurred errors to the DDC installation.

AME 120 NLX-1

The AME 120NLX-1 is a compact gear motor actuator that is assembled to ½” to 1-¼” AB-QM valves sizes.

The actuator receives a modulating 0(2)-10VDC or 0(4)-20mA signal to provide precise control.

The profile of the actuator assembly is ideal in fan coil units, induction units, small reheaters, recoolers and zone applications in which hot/ chilled water is the controlled medium.

AME 13 SU/SD-1

The AME 13 SU/SD-1 is a compact gear motor actuator that is assembled to ½” to 1-¼” AB-QM valves sizes.

​​​​​​​Safety version is activated automatically in case of power failure or if the power supply is switched off by the safety thermostat.

AME 130 (H)/ AME 140 (H)

AME 130, AME 140, AME 130H and AME 140H actuators are used with:

• VZ DN 15, 20,
  
• VZL DN 15, 20 with stem extension plug or
  
• AHQM (DN 15-32) valves.
  
  

AME 25 / AME 35

AME 电动驱动器通过加装适配器（代码 065Z0311，另行订购）与 VRB、VRG、VF、VL 阀体组合使用，以及直接与最大直径为 DN 50 的 VFS 阀体组合。
驱动器可自动检测阀门末端位置来调节行程，从而 缩短调试时间。

AME 435

AME 435 QM

AME 435 QM 模拟量控制驱动器适用于动态压差平衡型电动调节阀 AB-QM，从 DN 40 至 DN 100

AME 55 QM

Actuator is used with pressure independent balancing and control large valve type AB-QM DN 125 and DN 150.

AME 655-1 / AME 685-1 / AME 658 SU-1 / AME 658 SD-1

AME 655-1、658 SU/SD-1 和 685-1 系列电机驱动 器适用于根据区域供热/制冷、供热、通风和空调 应用的要求提供阀门控制。
AME658 系列驱动器可在断电时为阀门开启或关 闭提供安全功能。对于 AME 655-1 和 AME 685-1，不包括此功能。

根据电子控制器输出的要求，此系列驱动器可接 入模拟量或浮点控制中。
电机驱动器 AME 65x 与 AB-QM 系列压力无关 型控制阀组装在一起，尺寸范围为 5" (DN 125) 至 6" (DN 150)。
电机驱动器 AME 685-1x 与 AB-QM 系列压力无 关型控制阀组装在一起，尺寸范围为 8" (DN 200) 至 10" (DN 250)。

AMI 120 NL-1

The AMI 120 NL-1 is a 2 point (ON/ OFF), 3 wire actuator used with the AB-QM pressure independent control valves installed on hot or chilled water system applications. This actuator is installed on AB-QM valve sizes ranging from 1/2” to 1- 1/4”. The AB-QM assembly is suitable for installation within fan coil units, VAV, induction units or additional units that require combined balancing and valve control, which could be located within enclosures or plenum rated spaces.

As a 3 wire actuator, it receives constant power to travel to its default position and upon receipt of input signal will travel in the opposite direction. Designed within the actuator is an overload and gap function to prevent unnecessary travel from the actuator.

AMI 140

AMI 140 是一款 2 点 3 线驱动器，用于 AB-QM（DN 10-32）和 VZ、VZL、VRBZ 阀门。 该驱动器适用于风机盘管、诱导器、小型再热器、再冷却器，以及以热水/冷水为受控介质的区域应用。 该驱动器的出厂默认设定（驱动杆完全向上）：AB-QM 的常闭功能、VZ、VZL 和 VRBZ 的常开功能。
可以将设置从常闭更改为常开功能。

AMV 110 NL / AMV 120 NL

这款驱动器适用于动态压差平衡型电动调节阀 AB-QM，从 DN 10 至 DN 32。

​​​​​该产品的典型应用有： 终端设备（风机盘管、制冷吊顶、空气处理设备...)的温度控制和持续自动平衡、

AMV 120 NL-1

The AMV 120 NL-1 is a 3-point triac control actuator with end position indication. This actuator is assembled to the AB-QM pressure independent control valves ranging from 1/2” to 1- 1/4” sizes and applied within hot or chilled water system applications.

​​​​​​​The AB-QM assembly is suitable for installation within fan coil units, VAV, induction units or additional units that require combined balancing and valve control, which could be located within enclosures or plenum rated spaces. Designed within the actuator is an overload and gap function to prevent unnecessary travel from the actuator.

AMV 130(H) / AMV 140(H)

AMV 130/140 and AMV 130H/140H actuators are used with:
   - VZ DN 15, 20,
  ​​​​​​​ - VZL DN 15, 20 with stem extension plug or
  ​​​​​​​ - AHQM (DN 15-32) valves.

The actuator can be used with fan coil units, induction units, small reheaters, recoolers and zone applications in which hot/cold water is the controlled medium.

AMV 25 SD / AMV 25 SU

AMV 25 SD or SU electric actuators are used with valves gen.2009 type VRB, VRG, VF, VL with additional adapter (Code No. 065Z0311, not supplied) and VFS 2 valves up to DN 50 diameter.

The actuator automatically adapts its stroke to valve end positions which reduces commissioning time. Optional auxiliary switches, feedback potentiometer and valve stem heater are available.

AMV 435

AMV 435 actuator is used with two and three-way valves type VRB, VRG, VF and VL up to DN 80 diameter and for AHQM DN 40-100. It is also used with pressure independent balancing and control valve type AB-QM from DN 40 to DN 100.

The advanced design incorporates load related ‘switch-off’ to ensure that actuators and valves are not exposed to overload.

Combinations with other valves could be seen under Accessories

Main data:

• Nominal voltage:
  

• Control input signal: 3 point
  
• Force: 400 N
  
• Stroke: 20 mm
  
• Speed (selectable):
  

• Max. medium temperature: 130 °C
  
• LED signalling
  
• End-position signals
  
• Manual operation