Metering units
Products shown: 3
Flat Station G 2.0
Flat station G 2.0 includes a multi-functional differential pressure controller with flow restriction and integrated control valve. It also has placeholders for an energy meter (¾" × 110 mm) as well as cold and hot water meters (¾" × 80 mm each). Ball valves are located in each connection. The heating supply line is equipped with a sensor pocket for mounting the sensor (M10 × 1) of the heat meter. There is also an option to install an MTCV circulation balancing valve in combination with the connection set (item no.: 267B0102). A multi-functional differential pressure controller with flow restriction and integrated control valve including an actuator is mounted in the heating supply line for zone control. An automatic air vent valve is installed in the heating return line. The built-in drip tray with hose connection allows service-friendly work at the station and convenient meter replacement. Any leaks can be detected early. Flush-mounted box including frame and door.
Metering unit PM/PV/BD
Danfoss Metering Unit is a heating and cooling unit, which can be used for metering, balancing, and controlling of individual apartments in centralized heating and domestic hot water systems. The Metering Unit comes pre-assembled, which will decrease the overall installation time significantly.
Modular Metering Unit
Danfoss Metering Unit is a modular heating and cooling unit, which can be used for metering, balancing, and controlling of individual apartments in centralized heating and domestic hot water systems. It consists of 8 different articles that are fully compatible and can be easily mounted to all pipe directions.