Room controls
Products shown: 17
Accessories, hard-wired system
The electronic room thermostats FH-WT/-WP/-WS are used for single room temperature control, mainly in hydronic floor heating systems. All thermostats are provided with easy max. and min. limitation of the setting range, as well as thermal feedback to improve accuracy. LEDs behind the front cover indicates heat demand. FH-WT is a standard room thermostat. FH-WS is a thermostat with manual night setback and optional connection for a floor sensor. If a floor sensor is connected minimum or maximum regulation is selected with a switch, depending on the type of floor i.e. wooden floor (max) or tiles (min). FH-WP is a tamper proof model of the FH-WS for use in public environments i.e. schools
Danfoss Icon2™ Main Controller
Efficient, smart control: Danfoss Icon2™ offers hassle-free installation and precise hydronic underfloor heating with smart-home compatibility. Danfoss Icon2™ is engineered for efficient hydronic underfloor heating control. With a streamlined design featuring fewer components, it ensures a swift and trouble-free installation process. The system provides precise temperature regulation and energy efficiency. Compatibility with smart-home technology enhances user control. Its flexibility accommodates various applications, making Danfoss Icon2™ a reliable choice for those seeking efficient and adaptable hydronic underfloor heating solutions.
Danfoss Icon2™ RT
Danfoss Icon2™ RT is a series of wireless thermostats that offers the freedom to place your thermostat without the constraints of wires in the wall. The fade away feature, together with the minimalistic design, only 16 mm deep, gives it elegance and makes it blend in with the surroundings.The Icon2™ RT is Zigbee 3.0 certified and be integratedwith compatible smart home solutions
Danfoss Icon™ 230V RT wired
Danfoss Icon™ is a range of flush and surface mounted room thermostats for hydronic floor heating applications.Danfoss Icon™ Dial/Display/Programmable is mains powered and can be used as a stand-alone thermostat or in combination with Wiring Centers.The thermostat uses a relay output/triac output and can control up to 5 thermal actuators.The user can set the desired room temperature with the dial, ranging from 5 to 30 degrees, In Display variant, via the touch user interface and read the measured room temperature, In Programmable variant, can choose between 7 pre-defined heating schedules, which can be temporarily overridden by using the three mode keys.The dial can be removed to allow limitation pins to limit the setpoint range, In Display, the thermostat uses a "touch on glass" interface with a shine-through display that remains "OFF" during normal operation. In Programmable, the thermostat can operate without scheduling, maintaining a constant room temperature setpoint.
Danfoss Icon™ 230V Wiring Center
Danfoss Icon™ 230V Wiring Center is a connection box for use in hydronic floor heating using 230V thermostats and actuators.The Icon™ 230V Wiring Center can connect up to 14 thermal actuators from up to 8 room thermostats. It is provided with 230V Live circulation pump output and a voltage-free relays for controlling a boiler. The relays are activated when one or more thermostats require heat.The Wiring Center also supports away and cooling mode which can be controlled by a 230 V signal as well as LED’s to indicate when outputs are active.Mounting is made easy due to a simple layout of the terminals and clear marking on the screw terminals. Mounting can be done by using screws.
Danfoss Icon™ 24V Master Controller
Danfoss Icon™ is a modular heating system forindividual room control. It can be configured asa wired or wireless system or as a combination, ifrequired. The center of the system is the Danfoss Icon™Master Controller 24 V, which configures and tiesthe system together.Installation and set-up of the Danfoss Icon™ MasterController 24 V is made easy by using the pre-definedapplication and intuitive touch user interface.
FH-WC Connection Box - 230 V
FH-WC is a connection box for use in hydronic floor heating systems supplied from a manifold. FH-WC is a wiring center for connecting thermal actuators to the room thermostats. It is provided with two potential-free relays for controlling a circulation pump and a boiler. The relays are activated when one or more thermostats require heat. FH-WC is connected to 230 VAC/50 Hz. Mounting is made easy due to the symbols printed on the screw terminals.
FHV Regulating Valve
FHV provides an economical method of incorporating a radiant floor heating system into an existing hot water or radiator system. FHV self-acting regulators are well suited to handle underfloor heating temperature in single rooms(bathrooms, entry ways,kitchens). FHV control valves are available in two versions: FHV-A control valves are suited to control individual underfloor heated rooms.The FHV-A is placed on the supply side of a floor heating system, and is capable of providing hydraulic balancing via the FHV-A’s integral pre-setting feature. A standard RA 2000 operator is fitted to the FHV-A valve. FHV-R valves are designed for systems using floor heating in conjunction with radiators.The valve is place on the return side of the radiant floor system.The valve’s operator, FJVR, senses the return fluid temperature of the system and regulates the valve appropriately. When the FHV-R is used for a radiant heating system, the maximum floor heated area should not be greater than 110 sq. ft.
