Ventile für thermostatische Fühlerelemente

KOVM

KOVM is 3-way mixing valve which can, among others, be used for the water-side regulation of terminals in the form of “fan-coils” or as induction units. It can be combined with RAVK self-acting thermostatic actuator.

RAV

RAVI-KOVM , RAVI-VMT

TPC

These self-acting controllers are designed to be integrated directly to heat exchanger. They are developed to control direct heating and instantaneous heating of domestic hot water by means of heat exchanger. The family of products offers full flexibility of different requirements regarding control performance. Innovative design enables simple, fast and reliable connection to heat exchanger and most importantly production of compact and user friendly stations for heating and preparation of domestic hot water. The capacity of controllers fully covers the needs of domestic hot water preparation and heating for flats, one family houses or dwellings. Controllers can be mounted to district heating network, different heating systems or centrally located boiler system in a dwelling house (see “Main data” for specifications for the network).

VFG / VFGS 2 / VFU

Valves for heating, district heating and cooling systems.

The valves can be used with following actuators:​​​​​​​
    - Thermostats (TR) AFT...;
  ​​​​​​​  - Safety Temperature Monitor (STM) STFW;
  ​​​​​​​  - Actuators AMV(E) 655, 658, 659.

VG / VGF

VG and VGF are pressure relieved 2-way normally open (NO) valves, designed to be combined with:

• AVT thermostatic actuators
  
• STM safety temperature monitors
  
• STL safety temperature limiters
  

• For domestic hot water (DHW) production: hot water tanks; storage charge systems; instantaneous domestic hot water production.
  
• In mixing loops and room heating systems as well.

VGS

VGS ist ein druckentlastetes und normal geöffnetes (NO) 2-Wege-Ventile für Dampf, einsetzbar in Kombination mit:

• AVT Temperatur-Stellantriebe;
  
• STM Schutz-Temperaturwächter;
  
• STL Schutz-Temperaturbegrenzer;
  
• AMV (E) 20 / AMV (E) 30 elektr. Stellantriebe;
  
• AMV (E) 23 / AMV (E) 33 elektr. Stellantriebe mit Federrücklauffunktion.
  ​​​​​​​
  

VGU / VGUF

VGU und VGUF sind druckentlastete und normal geschlossene (NC) 2-Wege-Ventile, einsetzbar in Kombination mit:
- AVT Temperatur-Stellantriebe
- AMV (E) 20 / AMV (E) 30 elektr. Stellantriebe
- AMV (E) 23 / AMV (E) 33 elektr. Stellantriebe mit Federrücklauffunktio
​​​​​​​
In Kombination mit einem AVT TemperaturStellantrieb und einem AMV (E) elektrischen Stellantrieb können die Ventile vor allem in Kältesystemen eingesetzt werden.

VMA

VMA ist ein Durchgangsventil, das bevorzugt in Fernwärmeanlagen eingesetzt wird.

Das Durchgangsventil VMA kann kombiniert werden mit:

• thermischem Stellantrieb ABV
  
• den Thermostaten RAVI und RAVK
  ​​​​​​​
  ​​​​​​​

VMT

VMT is 2-way seated valve primarily for use in heating systems.

It can be combined with:
• ABV and ABNV* Thermohydraulic actuators
• RAVI, RAVK and RAVV self-acting thermostatic actuators
* ABNV can be combined with VMT-/8 valves only.

VMV

Das 3-Wege Stellventil VMV kann kombiniert werden mit:

• elektrischen Stellantrieb AMV(E) 10, 13
• elektrischen Stellantrieb AMV150 + AMV(E) 130/140
• thermischen Stellantrieb ABV (NC-Ausführung nur für DN15 und DN20).
• Thermostaten RAVK 25 … 45 °C in den Nennweiten DN15 und DN20