Lämpötila-anturit

AK-HS 1000

Pt 1000 product temperature sensor. The sensor is developed for temperature monitoring and data logging in HACCP system. It has been designed to simulate a product placed in a refrigeration application. Hereby a realistic HACCP report is achieved.

Together with an ADAP-KOOL® appliance control the HACCP tolerance requirement of ±1 K in the whole area is complied with in the whole range of -30 – 15 °C.

AKS 11

Pt 1000 temperature sensor.
The sensor can be used for temperature logging on monitoring in conjunction with Danfoss controllers in the following areas:
• Refrigeration
• Air conditioning
• Heating
The sensor comes adjusted and complies with the requirements to tolerance in EN 6075, class B.

AKS 12

Danfoss AKS 12 Pt 1000 temperature sensor.
The sensor can be used for temperature logging on monitoring in conjunction with EKC controllers in the following areas:

• Refrigeration
  
• Air conditioning
  
• Heating
  ​​

AKS 21

EKS 211

The sensor can be used for measuring air temperatures in the following areas: refrigeration, air conditioning and heating.
NTC characteristic matches controllers type EKC, ERC21x and case controllers. The sensor may not be used for food safety logs and regulation of superheat.

EKS 221

NTC temperature sensor for temperaturemeasurements in the following areas:• Refrigeration• Air conditioning• HeatingThe sensor characteristic matches to:• OPTYMA room controllers• MCX unit controllersThe sensor is available in two versions:• Sensor house in thermo plastic rubber andflat cable• Sensor house in steel and with round cable

ETN

Danfoss has selected a programme of temperature sensors to be used with ERC range of controllers.

NTC (Negative Temperature Coefficient) temperature sensors change resistance with temperature in a manner compatible with the controller software. They are fully compliant with the tolerance requirements according to IEC 60060-1.

MBT 3250

Heavy-duty temperature sensors for controlling cooling water, lubrication oil, hydraulic oil and refrigeration plants within general industry and marine applications. On a standardized Pt 100 or Pt 1000 element, which gives a reliable and accurate measurement. The sensor can also be delivered with NTC / PTC elements on request. The MBT 3250 with changeable measuring insert is equipped with EN 175302-803-A Pg plug as standard. The measuring insert is based on a silicone cable, which makes the sensor very resistant towards vibrations.

MBT 3270

The flexible temperature sensor MBT 3270 can be used in many industrial applications such as: Air Compressors, Mobile Hydraulics and Exhaust gas return systems. In other words applications where robustness, size and performance are essentials. The sensor can be equipped with different sensing elements (RTD, NTC and PTC) and is available with different electrical connections (Cable, Delphi Metri Pack, AMP junior power Timer, Deutch DT04).

MBT 3560

With MBT 3560 we have combined the technology of our standard temperature sensors and the electrical connections from our MBS pressure transmitters with a new developed electronics which has resulted in a compact temperature sensor with a built-in transmitter. The MBT 3560 is designed for use in harsh industrial enviroments where reliable, robust and accurate equipment is required. Available with a wide selection of process and electrical connections. Can be delivered with a 33 mm extension length which makes it possible to measure temperatures up to 200 °C without damaging the built-in electronics.

MBT 5550

With the MBT 5550 we have combined our temperature transmitter with a detachable thermowell MBT 120 enabling replacement of the transmitter while the application is in operation. The MBT 5550 is designed for use in harsh environments where reliable, robust, and accurate equipment is required.