230V Room thermostats
Product types shown: 7
Basic Plus2 Modbus Communication
WT-DM room thermostats are used for room temperature control in water-based floor heating systems.
By controlling room temperature in accordance with the temperature desired by the user, the room thermostats provide optimal energy savings while upholding optimal thermal comfort in the room.
BasicPlus2
Los termostatos de ambiente Danfoss BasicPlus2 están diseñados para un control preciso de la temperatura en sistemas de calefacción por suelo radiante con agua. Al mantener la temperatura según las preferencias del usuario, garantizan un confort térmico óptimo y un importante ahorro energético. Disponibles en versiones con dial, pantalla y pantalla programable, estos termostatos combinan facilidad de uso con funciones de control avanzadas para proteger los suelos, prevenir daños por heladas y mejorar la eficiencia de la calefacción.
Danfoss Icon™ Dial Room Thermostats, 230V
Danfoss Icon™ is a range of flush and surface mounted room thermostats for hydronic floor heating applications.
Danfoss Icon™ Dial is mains powered and can be used as a stand-alone thermostat or in combination with Wiring Centers.
The thermostat uses a relay output and can control up to 5 thermal actuators.
The user can set the desired room temperature with the dial, in a range from 5 to 30 degrees.
The dial can be removed, allowing limitation pins to be used to limit the setpoint range.
Danfoss Icon™ Display Room Thermostat, 230 V
Danfoss Icon™ is a range of flush and surface mounted room thermostats for hydronic floor heating applications.
Danfoss Icon™ Display is mains powered and can be used as a stand-alone thermostat or in combination with Wiring Centers.
The thermostat uses a triac output and can control up to 5 thermal actuators.
The user can set the desired room temperature via the touch user interface and read the measured room temperature.
The thermostat uses a “touch on glass” interface with a shine through display. The display is “OFF” in normal operation.
Danfoss Icon™ Programmable Room Thermostats, 230V
Danfoss Icon™ is a range of flush and surface mounted room thermostats for hydronic floor heating applications.
Danfoss Icon™ Programmable is mains powered and can be used as a stand-alone thermostat or in combination with Wiring Center.
The thermostat uses a triac output and can control up to 5 thermal actuators.
The user can choose between 7 pre-defined heating schedules. A schedule can be temporarily overrided by using the three mode keys.
The thermostat can also operature without scheduling (constant room temperature setpoint).
The thermostat uses forecast (adaptive learning).
The thermostat uses a “touch on glass” interface with a shine through display. The display is “OFF” in normal operation.
