Danfoss logo
SM115 SZ115 SM125 SZ125 - Rotolock - 8551121

After sale, SM125S9RC

SM125-9RI

Refrigerants: R22, Segment usage: Air conditioning, Compressor power supply [V]: 380/3/60, Packing format: Single pack

Product specifications

Characteristic
Value
ApprovalCEULUKCA
Brand techniqueAfter sale
CE evaluatedYes
Capacity controlFixed speed
China RoHS complianceYes with exemptions
ColourBlue
Compressor power supply [V]380/3/60
Configuration codeSingle
Connection typeRotolock
Contain batteriesNo
CoolselectorFilterDiscontinued models
DG Indicator ProfileNot relevant for dangerous goods
DescriptionSM125-9
Diameter [mm]253 mm
Discharge connection height [mm]536 mm
Discharge connection pipe size [in]3/4 in
Discharge connection size [in]1-1/4 in
Drawing number8551121b
EU RoHS complianceYes with exemptions
EU RoHS exemption clause7(c)-I6(a)6(a)-I6(c)7(a)8(b)
EconomizerNo
Factory HP [bar]33 bar
Factory LP [bar]25 bar
FamilySM
Fitting remark(shipped with rotolock version only)
Fitting sleeveODF
Fitting standardRotolock
Frequency [Hz]60
GP LP torque [Nm]15 N-m
Gauge port HPNone
Gauge port LPSchrader
Glass mountingThreaded
Glass torque [Nm]50 N-m
High Side TS Max150.0 °C
High Side TS Min-35.0 °C
High Side Volume2.0 L
High value of nominal voltage at 60Hz [V]380 V
High value of voltage range at 60Hz [V]418 V
IDVNo
IP protection classIP54 (with cable gland)
In scope of WEEENo
LRA155 A
Low Side TS Max63.0 °C
Low Side TS Min-35.0 °C
Low Side Volume14.0 L
Low value of nominal voltage at 60Hz [V]380 V
Low value of voltage range at 60Hz [V]342 V
MMT32 A
Material DescriptionCOMP PERFORMER ROTOLOCK-EQU
Max pressure (PS) - high side30.20 bar
Max pressure (PS) - low side25.00 bar
Characteristic
Value
Maximum Operating Current [MOC]29 A
Model numberSM125S9RC
Motor protectionInternal thermostat, ext. overload protector needed
Mounting torque [Nm]21.00 N-m
Network power supply [V/Ph/Hz]380-400/3/60
Number of starts per hour [Max]12
Oil charge [L]3.80 L
Oil drain1/4'' flare
Oil drain torque [Nm]35 N-m
Oil equalization3/8'' flare SAE
Oil equalization torque [Nm]48 N-m
Oil reference160P
Oil typeMineral
Packaging height [mm]671 mm
Packaging length [mm]470 mm
Packaging weight [Kg]82 kg
Packaging width [mm]370 mm
Packing formatSingle pack
Packing quantity1
Phase3
Power connectionsScrew 4.8 mm
Product TypeSM125
Product groupHermetic compressors
Product lineCommercial Compressors
Product nameScroll compressor SM
Refrigerant charge [kg] [Max]11.00 kg
RefrigerantsR22
Rotational speed at 60Hz [rpm]3500 rpm
Segment usageAir conditioning
Shipped fittingsSuction and discharge solder sleeves, rotolock nuts and gaskets
Shipped instructionsInstallation instructions
Shipped mountingMounting kit with grommets, bolts, nuts, sleeves and washers
Shipped oilInitial oil charge
Suction connection height [mm]180 mm
Suction connection material-
Suction connection pipe size [in]1-1/8 in
Suction connection size [in]1-3/4 in
Swept volume [cm3]166.60 cm³
TechnologyScroll
Test HP [bar] [Max]32.0 bar
Test LP [bar] [Max]25.0 bar
Test dif [bar] [Max]24 bar
Torque Ebox cover [Nm]2 N-m
Torque earth [Nm]2.00 N-m
Torque power [Nm]3.00 N-m
Total height [mm]579.0 mm
U.S. EPA labelFor installations using U.S. EPA restricted refrigerants, this product may be used for servicing existing equipment only.
UL evaluatedYes
Viscosity [cP]32.0 cP
Winding resistance for three-phase compressors with identical windings [Ohm]0.74 Ohm

General specifications

Characteristic
Value
Gross weight89 Kilogram
Net weight79 Kilogram
Characteristic
Value
EAN/UPC5702428661058