
Sondes de détection de gaz
Danfoss Sensing Solutions gas detection sensors are used to continuously monitor any refrigerant leaks, supporting safety, compliance, and system reliability in refrigeration and HVAC applications. In applications such as cold room systems, they are relevant where refrigerant monitoring is needed to help detect and prevent any harmful gas buildup and trigger alarms or other safety responses.
Gas sensors are also used outside cold rooms across food retail refrigeration, industrial refrigeration, commercial and residential HVAC systems, data centers air cooling systems, refrigerated storage, and other refrigeration applications.
Features and benefits
- Continuous, real-time automatic monitoring and alarms for gas detection
- Support for a wide range of refrigerant gases and propane, isobutane, and various A2L refrigerants, depending on the sensor family
- The category supports both cold room-related refrigeration use cases and broader HVAC and industrial refrigeration applications
Product types shown: 4

Basic
The Basic and Basic+ gas detection units are used for monitoring and warning of hazardous gas concentrations. They can be used for detecting commonly used refrigerants.
The Basic and Basic+ gas detection units are intended to be connected to a central system like Gas Detection Controller Unit, or a PLC, by either Analog or RS485 open Modbus communications. The central system converts the alarm signal from the Basic unit to activation of alarm devices.
The gas detection units come with a factory default, 2-step alarm set-up ready for use. The integrated software enables the user to configure two individual alarm ranges. Alarm 1, a pre-alarm indicating the gas level has passed a predefined threshold 1, and - if the gas level passes predefined threshold 2 - the final alarm 2.
DGS
Les capteurs DGS peuvent être utilisés dans des systèmes autonomes ou intégrés, où une surveillance automatique continue en temps réel avec le système de contrôle et de surveillance de la réfrigération Danfoss ADAP-KOOL® et/ou les systèmes de gestion des bâtiments est appliquée.
DGS aide ses clients à se conformer aux réglementations sur les gaz fluorés et aux exigences en matière de santé et de sécurité pour les systèmes nouveaux ou existants dans les supermarchés, les installations de réfrigération industrielle, les entrepôts frigorifiques et les zones d'application spéciales.
GD heavy duty
The Heavy Duty gas detection units are used for monitoring and warning of hazardous Ammonia gas concentrations. They are intended for ATEX/ IECEx applications and consists of a robust flameproof metal enclosure that can be kept closed after wiring, since programming (configuration) is performed by magnetic field to the display via a magnetic pen. Depending on the application, they are available with an electrochemical, a semiconductor or a Pellistor sensor covering a wide range of ppm.
The Heavy Duty gas detection units are intended as Stand-alone, or connected to a central system like Gas Detection Controller Unit, or a PLC.
As stand-alone the on-board relay can be used for activation of alarm devices, while the Analog or RS485 Modbus connection to a central system allows additional centralized monitoring and alarm activation.
The gas detection units come with a factory default, 2-step alarm set-up ready for use.The integrated software enables the user to configure two individual alarm ranges. Alarm 1, a pre-alarm indicating the gas level has passed a predefined threshold 1, and - if the gas level passes predefined threshold 2 - the final alarm 2.
GD premium
The Premium line gas detection units are used for monitoring and warning of hazardous gas concentrations. They can be used for detecting most commonly used refrigerants. Depending on the application and model, each unit is available with one or two of 4 sensor types.
The Premium line gas detection units are intended as Stand-alone, or connected to a central system like Gas Detection Controller Unit, or a PLC.
As stand-alone the on-board relays can be used for activation of alarm devices, while the Analog or RS485 Modbus connection to a central system allows additional centralized monitoring and alarm activation.
4 out of the 6 Premium models have integrated Display/keypad for direct access to the user interface.
The gas detection units come with a factory default, 2-step alarm set-up ready for use. The user interface enables the user to configure two individual alarm settings.